Control Unit C-TOP-INOXPA S.A.

Control Unit C-TOP

10375

103

154

与供应商联系

收藏点赞

产品描述

产品目录

产品视频

Application

The C-TOP is a pneumatic control unit designed to ensure an optimum control over the INOXPA process valves. It is compatible with most PLC (Programmable Logic Controllers) automated systems with digital communication.

C-TOP can be installed to any current process valve in the food-processing, beverage and biopharmaceutical industries.

Operating principle

The C-TOP control unit incorporates indication and command devices to control pneumatically operated process valves.

This unit as a single piece has the following features:

• Pneumatic and electric control over the valve

• Position sensors with feedback

The control units are fitted to the pneumatic actuator. It receives signals from a control panel or from a PLC to actuate the valves and sends signals to the PLC or to the control panel to communicate the status/position of the valve.

C-TOP unit contains three LEDs (depending on the configuration) constantly indicating the operating status of the valve. A fourth LED (white) indicates whether the operating voltage supply is connected.

Design and features

The design of the C-TOP unit is simple, modular and resistant that guarantees the maximum flexibility. Depending on the product version it has up to three 3/2 solenoid valves (NC) and three sensors. If necessary, an additional external sensor and an additional external solenoid valve can be connected.

The sensors are actuated contact-free by a magnet attached to the control rod. The sensor can be magnetoresistive or magnetic reed type and it is activated without contact wiith a magnet in the shaft control.

The C-TOP units can be set up according to the customer’s requirements.

Options

Materials

End cap: Polypropylene

Housing: Reinforced polypropylene

Plate: Reinforced polypropylene

Seals: EPDM

Screws: Stainless steel