Overview
Our Best and most versatile point level switch for liquids, slurries, granulars, and interface applications. With the IntelliPoint, simply install the sensor in your vessel and connect the power. The IntelliPoint, with an Auto-Ranging power supply, automatically calibrates itself. The self-test function of the IntelliPoint insures proper system operation. An AutoVerify™ self check circuit continuously monitors the complete system to verify it is functioning properly. The manual Certify™ not only checks the function of the system, but also checks the AutoVerify self-test circuits to make sure that they are also working properly. All these features make the IntelliPoint the most versatile RF switch on the market.
AutoVerify™ and Certify™ test features for critical applications
Cote-Shield™ circuitry ignores coatings
No moving parts for maintenance free operation
Applications from cryogenic to 2,000ºF, vacuum to 10,000 psi
Specs
Technology:
RF Admittance
Calibration:
None
Modes of Operation:
High and Low Level
Repeatability:
2mm (0.08 inch) conductive liquids
Response Time:
less than one second
Ambient Electron Temperature:
-30 to 70°C (-28 to 158°F ) KEMA
-40 to 70°C (-40 to 158°F ) FM/CSA
Storage Temperature:
-40 to 85°C (-40 to 185°F)
Indicators:
LEDs : Green Power, Red Relay 1, Red Relay 2
Self Check:
AutoVerify automatically and continously checks electronics and sensing element for faults. Manual Certify checks that the AutoVerify circuits are functioning.
Time Delay:
0-60 seconds, forward or reverse-acting
Supply Voltage:
85-250 Vac
21-100 Vdc auto-detecting without jumpers
DC to 400 Hz
简体中文
English
