Rated pressure for connected Brass Coupler and Steel Plug: 200 PSI (14 bar) Maximum Working and 14,500 PSI (1,000 bar) burst
Rated pressure for connected Brass Coupler and 303 Stainless Steel Plug: 200 PSI (14 bar) Maximum Working and 14,500 PSI (1,000 bar) burst
Construction
Machined components are manufactured using solid bar stock
Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
All couplers have a steel steam-sleeve as standard
Steel componentry is plated using ROHS Compliant Trivalent Chrome.
Large diameter steel steam-sleeves are hardened to resist deformation and maximize coupler service life.
EPDM steam-grade seals are standard
Brass couplers have a redundant O-ring sealing system (Dual O-Rings/no PTFE Back-up Ring)
Valve seals are crimped in place to maintain integrity during excessive flow conditions.
Compatibility & Interchange Data
Interchangeable to ISO7241 Series 'B'
Parker 60-Series Steam Couplings
Safety notes
Maximum working pressure has been calculated using standard saturated steam at 194°C (382°F) for general purpose continuous service. For advanced operating pressure or super-heated steam applications, contact Dixon for further information.
Do not disconnect steam couplings while under pressure! Maximum operating temperature for steam service couplings is 194°C (382°F), with an intermittent maximum temperature of 204°C (400°F). Be sure to use safety chains, or equivalent means, to prevent the line from thrashing around in a case where the coupling becomes disconnected.
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.
简体中文
English
